Imes 650i | Dental Softworks GmbH

Roughing milling tool

Roughing milling tool (CoCr, Titanium) Ø3,0mm r0,4 FS14mm
Shaft 6mm, Al coated
for speed roughing

62.00 €

Special milling tool (CoCr, Titan) Ø 1.0mm r0,1 FS9mm
Shaft 6mm, Al coated
for Datron machines, without ring

41.00 €

Finishing milling tool (PMMA, Wax) Ø1,0 r0.5 FS15mm
Shaft 6mm Den, Zircon coated
for Datron machines - without ring

43.00 €

Roughing milling tool (PMMA, Wax) Ø2,0mm r1.0 FS20mm
Shaft 6mm Den, Zircon coated
for Datron machines - without ring

43.00 €

Finishing milling tool (PMMA, Wax) Ø1,0mm FS20mm
Shaft 6mm Den, Zircon coated

42.00 €

Roughing milling tool (PMMA, Wax) Ø2,0mm r1.0 FS25mm
Shaft 6mm Den, Zircon coated

41.00 €

Finishing Grinding Pin (CER, Glass) Ø1.0|10
For Glass/Ceramics
Shank Ø6mm
GBDIA coated – for Datron

34.00 €

Rough Grinding Pin (CER, Glass) Ø2.0|12
For Glass/Ceramics
Shank Ø6mm
GBDIA coated for Datron – without ring

34.00 €

Roughing milling tool (PMMA, Wax) Ø2,5mm FS 20mm, Shaft 6mm, ZR-coated, total lenght 50mm, for Datron machines

42.00 €

Roughing cutter (CMP) Ø2.0 FS20mm shank 6mm CVD DIA ULTRA

245.00 €

Finishing cutter_CVD Ø1,5mm shank 6mm CVD DIA ULTRA

245.00 €

Finishing cutter (CMP) Ø1.0 FS10mm shank 6mm CVD DIA ULTRA

245.00 €

Finishing cutter (CMP) Ø1.0 FS14mm shank 6mm CVD DIA ULTRA

245.00 €

Finishing cutter_CVD Ø1,5mm FS16 shank 6mm CVD DIA ULTRA

245.00 €

Roughing cutter (CMP) Ø2.0 FS16mm shank 6mm CVD DIA ULTRA

245.00 €

Finishing milling tool (PMMA, Wax) 2z Ø2.0mm, FS 20mm, Shaft 6mm Zircon coated total lenght 53mm, for Datron machines

42.00 €