Skip to Content
  1. Products ...
  2. Milling Tools
  3. Imes Icore Machines

Imes Icore Machines

Sort By Sort By: Featured
[200001] Finishing milling tool

Finishing milling tool

Finishing milling tool (CoCr, Titanium) Ø1,5mm r0,75 FS10mm
Shaft Ø6mm, GL 45mm,
Den, blank
without ring for Datron machines, final measurement (WD)
81.00 €
[200185] Fissures milling tool

Fissures milling tool

Fissures milling tool (Zircon, PMMA, Wax) Ø0,3mm FS2mm
Shaft 6mm Den, uncoated
39.00 €
[200153] Fissures milling tool

Fissures milling tool

Fissures milling tool (Zircon) Ø0,6mm r0,3 FS12mm
Shaft Ø3mm, Den, DIA coated
72.00 €
[200146] Fissures milling tool

Fissures milling tool

Fissures milling tool (Zircon, PMMA) Ø0,6mm FS6mm
Shaft 6mm Den, Zircon coated
45.00 €
[200179] Fissures milling tool

Fissures milling tool

Fissures milling tool (CoCr, Titanium, Composite)
Ø0,6mm FS1.5mm
Shaft 6mm, total lenght 50mm,
for Datron machines - without ring
46.00 €
[200149] Fissures milling tool

Fissures milling tool

Fissures milling tool (PMMA, Wax, Peek)
Ø0,6mm r0,3 FS6mm
Shaft Ø3mm, Zircon coated
41.00 €
[200186] Fissures milling tool

Fissures milling tool

Fissures milling tool (PMMA, Wax) Ø0,6 FS12mm
Shaft 6mm Den, uncoated
38.00 €
[200137] Fissures milling tool

Fissures milling tool

Fissures milling tool (PMMA, Wax) Ø0,6 FS12mm
Shaft 6mm, Den, uncoated
38.00 €
[200174] Fissures milling tool

Fissures milling tool

Fissures milling tool (Zircon) Ø0.6 FS12mm
Shaft 6mm, DP coated,
for Datron machines - without ring
77.00 €
[200152] Fissures milling tool

Fissures milling tool

Fissures milling tool (Zircon) Ø0,6mm r0,3 FS16mm
Shaft Ø3mm, Den, DIA coated
72.00 €
[200173] Fissures milling tool

Fissures milling tool

Fissures milling tool (Zircon) Ø0,6 FS6mm
Shaft 6mm, DP coated,
for Datron machines - without ring
77.00 €
[200123] Fissures milling tool

Fissures milling tool

Fissures milling tool (CoCr, Titan, Composite) Ø0,6 FS1.5mm
Shaft 6mm, Den, coated
46.00 €
[200139] Fissures milling tool

Fissures milling tool

Fissures milling tool (Zircon, PMMA, Wax) Ø0,3mm FS2mm
Shaft 6mm Den, uncoated
39.00 €
[200131] Fissures milling tool

Fissures milling tool

Fissures milling tool (Zircon) Ø0,6 FS6mm
Shaft 6mm, DP coated
77.00 €
[200028] Special roughing milling tool for titan grade 4

Special roughing milling tool for titan grade 4

Special roughing cutter Ø2.0|FS14 for titanium grade 4 Ø2.0mm r0.5 FS14mm Shaft Ø6mm, AL coating GL 45mm, ring gauge 17mm
80.00 €
[200195] Fissures milling tool

Fissures milling tool

Fissures milling tool (PMMA, Wax) Ø0,6mm FS6mm
Shaft 6mm Den, Zircon coated
for Datron machines - without ring
45.00 €
[200227] Fissure Grinding Pin

Fissure Grinding Pin

Grinding Pin (CER, Glass) Ø0.6|10
for Glass/Ceramics
Shank Ø3mm
GBDIA coated with ring 855.025.A
28.00 €
[200221] Fissure Grinding Pin

Fissure Grinding Pin

Fissure Grinding Pin (CER, Glass) Ø0.6|11.5
For Glass/Ceramics
Shank Ø6mm
GBDIA coated
With ring – for Imes Icore

NEW! Total length: 40mm, Ring size: 14mm
For usage or any questions, please contact our support!
34.00 €
[200230] Fissure Grinding Pin

Fissure Grinding Pin

Grinding Pin (CER, Glass) Ø0.6|11.5
for Glass/Ceramics
Shank Ø6mm / taper: 5°
GBDIA coated
34.00 €
[200114] Special milling tool

Special milling tool

Special milling tool (CoCr, Titanium) Ø1,5mm r0,2 FS12mm Shaft 6mm, Al coated.
40.00 €
[200133] Finishing milling tool

Finishing milling tool

Finishing milling tool (Zircon) Ø1mm FS16mm
Shaft 6mm, DP coated
75.00 €