Milling Tools | Dental Softworks GmbH

Special roughing milling tool for titan grade 4

Special roughing cutter Ø2.0|FS14 for titanium grade 4 Ø2.0mm r0.5 FS14mm Shaft Ø6mm, AL coating GL 45mm, ring gauge 17mm

80.00 €

Fissures milling tool

Fissures milling tool (PMMA, Wax) Ø0,6mm FS6mm
Shaft 6mm Den, Zircon coated
for Datron machines - without ring

45.00 €

Fissures milling tool

Fissures milling tool (Zircon) Ø0,3mm r0,15 FS 2mm
Shaft Ø3mm, uncoated, 5-axially

34.00 €

Fissures milling tool

Fissures milling tool (CoCr, Titanium, Composite) Ø0,6 FS1.5mm
Shaft 6mm, Den coated

46.00 €

Fissure Grinding Pin

Grinding Pin (CER, Glass) Ø0.6|11.5
for Glass/Ceramics
Shank Ø6mm
GBDIA coated
with ring – for DC5

34.00 €

Fissure Grinding Pin

Grinding Pin (CER, Glass) Ø0.6|10
for Glass/Ceramics
Shank Ø3mm
GBDIA coated with ring 855.025.A

28.00 €

Fissure Grinding Pin (CER, Glass) Ø0.6|11.5
For Glass/Ceramics
Shank Ø6mm
GBDIA coated
With ring – for Imes Icore

NEW! Total length: 40mm, Ring size: 14mm
For usage or any questions, please contact our support!

34.00 €

Fissure Grinding Pin

Grinding Pin (CER, Glass) Ø0.6|11.5
for Glass/Ceramics
Shank Ø6mm / taper: 5°
GBDIA coated

34.00 €

Finishing milling tool

Finishing milling tool (PMMA, Wax) Ø0,6 r0,3 FS6mm
Shaft 3mm, 5-axially
customer request with Zircon coated

29.00 €

Special milling tool

Special milling tool (CoCr, Titanium) Ø1,5mm r0,2 FS12mm Shaft 6mm, Al coated.

40.00 €

Finishing milling tool

Finishing milling tool (Zircon) Ø1mm FS16mm
Shaft 6mm, DP coated

75.00 €

Finishing milling tool

Finishing milling tool (Zircon, PMMA, Wax) Ø1,0mm FS16mm
Shaft 6mm Den, Zircon coated

42.00 €

Finishing milling tool

Finishing milling tool (PMMA, Wax) Ø1,0mm FS16mm
Shaft 6mm Den, Zircon coated
for Datron machines - without ring

42.00 €

Finishing milling tool

Finishing milling tool (Zircon/PMMA)
Ø1.0mm r0,5 FS 16mm
Shaft 6mm, Zircon coated

42.00 €

Finishing milling tool

Finishing milling tool (CoCr, Titanium) Ø2.0mm r1,0 FS 12mm
Shaft Ø3mm, AN,

37.00 €

Finishing milling tool

Finishing milling tool (PMMA, Peek, Wax)
Ø1.0mm r0,5 FS 20mm
Shaft 6mm, Zircon coated

42.00 €

Finishing milling tool

Finishing milling tool(CoCr, Titanium) Ø2mm r0,2 FS12mm
Shaft 6mm, Al coateed, final masurement (WD)

45.00 €

Finishing milling tool

Finishing milling tool (CoCr, Titanium) Ø2 r0,2 FS12mm
Shaft 6mm, total lenght 50mm,
Al coated
for Datron machines - without ring, final measurement (WD)

40.00 €

Finishing milling tool

Finishing milling tool (PMMA, Wax) Ø1,0 r0,5 FS16mm
Shaft 3mm, uncoated, 5-axially

35.00 €

Finishing milling tool

Finishing milling tool (Zircon) Ø1 FS16mm
Shaft 6mm, DP coated,
for Datron machines - without ring

75.00 €

Finishing milling tool

Finishing milling tool (CoCr, Titanium, Composite) Ø1,5mm FS14mm
Shaft 6mm, DP coated

45.00 €