Skip to Content
  1. Products ...
  2. Milling Tools
  3. Datron Machines
  4. Dental C

Dental C

Sort By Sort By: Featured
[200001] Finishing milling tool

Finishing milling tool

Finishing milling tool (CoCr, Titanium) Ø1,5mm r0,75 FS10mm
Shaft Ø6mm, GL 45mm,
Den, blank
without ring for Datron machines, final measurement (WD)
81.00 €
[200185] Fissures milling tool

Fissures milling tool

Fissures milling tool (Zircon, PMMA, Wax) Ø0,3mm FS2mm
Shaft 6mm Den, uncoated
39.00 €
[200179] Fissures milling tool

Fissures milling tool

Fissures milling tool (CoCr, Titanium, Composite)
Ø0,6mm FS1.5mm
Shaft 6mm, total lenght 50mm,
for Datron machines - without ring
46.00 €
[200186] Fissures milling tool

Fissures milling tool

Fissures milling tool (PMMA, Wax) Ø0,6 FS12mm
Shaft 6mm Den, uncoated
38.00 €
[200174] Fissures milling tool

Fissures milling tool

Fissures milling tool (Zircon) Ø0.6 FS12mm
Shaft 6mm, DP coated,
for Datron machines - without ring
77.00 €
[200173] Fissures milling tool

Fissures milling tool

Fissures milling tool (Zircon) Ø0,6 FS6mm
Shaft 6mm, DP coated,
for Datron machines - without ring
77.00 €
[200195] Fissures milling tool

Fissures milling tool

Fissures milling tool (PMMA, Wax) Ø0,6mm FS6mm
Shaft 6mm Den, Zircon coated
for Datron machines - without ring
45.00 €
[200230] Fissure Grinding Pin

Fissure Grinding Pin

Grinding Pin (CER, Glass) Ø0.6|11.5
for Glass/Ceramics
Shank Ø6mm / taper: 5°
GBDIA coated
34.00 €
[200196] Finishing milling tool

Finishing milling tool

Finishing milling tool (PMMA, Wax) Ø1,0mm FS16mm
Shaft 6mm Den, Zircon coated
for Datron machines - without ring
42.00 €
[200188] Finishing milling tool

Finishing milling tool

Finishing milling tool (CoCr, Titanium) Ø2 r0,2 FS12mm
Shaft 6mm, total lenght 50mm,
Al coated
for Datron machines - without ring, final measurement (WD)
40.00 €
[200175] Finishing milling tool

Finishing milling tool

Finishing milling tool (Zircon) Ø1 FS16mm
Shaft 6mm, DP coated,
for Datron machines - without ring
75.00 €
[200181] Finishing milling tool

Finishing milling tool

Finishing milling tool (CoCr, Titanium, Composite)
Ø1,5 FS14mm
Shaft 6mm, total lenght 50mm,
for Datron machines - without ring
45.00 €
[200187] Finishing milling tool

Finishing milling tool

Finishing milling tool (CoCr, Titanium, Composite) Ø2mm FS14mm
Shaft 6mm, total lenght 50mm,
Al coated
for Datron machines - without ring
45.00 €
[200176] Finishing milling tool

Finishing milling tool

Finishing milling tool (Zircon) Ø1,0 FS20mm
Shaft 6mm, DP coated,
for Datron machines - without ring
75.00 €
[200177] Roughing milling tool

Roughing milling tool

Roughing milling tool (Zircon) Ø2,0 FS20mm
Shaft 6mm, DP coated,
for Datron machines - without ring
75.00 €
[200178] Roughing milling tool

Roughing milling tool

Roughing milling tool (Zircon) Ø2,0 FS25mm
Shaft 6mm, DP coated, total lenght 50mm,
for Datron machines - without ring
75.00 €
[200180] Finishing milling tool

Finishing milling tool

Finishing milling tool (CoCr, Titanium, Composite)
Ø1mm FS9mm
Shaft 6mm, total lenght 50mm,
for Datron machines - without ring
45.00 €
[200182] Special milling tool

Special milling tool

Special milling tool (CoCr, Titanium, Composite)
Ø1,5 FS14mm
Shaft 6mm, total lenght 50mm, Al coated,
for Datron machines - without ring
40.00 €
[200183] Torusfräser (CoCr, Titan) Ø1,5 r02 FS12mm

Torusfräser (CoCr, Titan) Ø1,5 r02 FS12mm

Finishing milling tool (CoCr, Titanium, Composite)
Ø1,5 r02 FS12mm
Shaft 6mm, Al coated
for Datron machines - without ring
40.00 €
[200189] Roughing milling tool_SPEED

Roughing milling tool_SPEED

Roughing milling tool_New Speedtool: Roughing CoCr in higher speed_or much more standing time (CoCr, Titanium, Composite) Ø2mm r0,3 FS14mm
Shaft 6mm, total lenght 50mm,
Al coated
for Datron machines - without ring
68.00 €
[200190] Roughing milling tool

Roughing milling tool

Roughing milling tool (CoCr, Titanium, Composite) Ø3mm FS20mm
Shaft 6mm, total lenght 50mm,
Al coated
for Datron machines - without ring
45.00 €